| MOQ: | 1PCS |
| Price: | USD9.99-99.99 |
| Standard Packaging: | Vacuum bags+Cartons |
| Delivery Period: | 8-9 working days |
| Payment Method: | T/T |
| Supply Capacity: | 5000PCS per month |
This two-layer high-frequency rigid circuit board is fabricated on TLY-5Z dielectric and finished with ENIG to maintain stable surface condition and good solderability. White silkscreen marks only the top copper layer, while green solder mask coats both the top and bottom surfaces; the bottom side carries no silkscreen marking at all. This board serves those looking for lightweight radio-frequency circuit substrates built to hold stable plated through-hole performance under variable thermal loads, a critical trait for aerospace projects where every gram counts and consistent electrical behaviour cannot be compromised.
PCB Specifications
| Item | Details |
| Base material | TLY-5Z |
| Layer count | 2-layer |
| Board dimensions | 70 mm × 120 mm per piece, tolerance ±0.15 mm |
| Minimum Trace / Space | 6 / 9 mils |
| Minimum Hole Size | 0.35 mm |
| Blind vias | None |
| Finished board thickness | 0.8 mm |
| Finished copper weight | 1 oz (1.4 mils) outer layers |
| Via plating thickness | 20 μm |
| Surface finish | ENIG |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Green |
| Bottom Solder Mask | Green |
| Pre-shipment check | 100% electrical test |
We take Gerber RS-274-X for file input. Every run adheres to IPC-Class-2, and these circuit boards can ship out to any region globally.
PCB Stack-up
The stack is straightforward: two copper foils wrap a single solid sheet of TLY-5Z dielectric substrate.
| Layer | Material & Thickness |
| Copper_layer_1 | 35 μm |
| TLY-5Z Substrate | 0.762 mm (30 mil) |
| Copper_layer_2 | 35 μm |
PCB Statistics
| Item | Quantity |
| Components | 51 |
| Total Pads | 96 |
| Thru Hole Pads | 56 |
| Top SMT Pads | 40 |
| Bottom SMT Pads | 0 |
| Vias | 21 |
| Nets | 2 |
![]()
About TLY-5Z Laminates
TLY-5Z belongs to a family of advanced composites built from glass-filled PTFE paired with woven fiberglass. Its low-density makeup targets weight-sensitive work such as aerospace hardware, delivering dimensional stability that plain unfilled PTFE cannot match. The material keeps expansion along the Z axis under tight control, and it handles thermal stress far better than many conventional low-Dk PTFE composites, protecting plated through holes during temperature swings.
The closely related TLY-5 grade relies on lightweight woven fiberglass reinforcement. It outperforms chopped-fiber PTFE blends in mechanical stability and supports consistent, high-yield production runs. Its very low dissipation factor works well at millimeter-wave bands. Independent OEM tests at 77 GHz confirm it holds steady insertion loss and dielectric behaviour, while bringing noticeably better yields. Dielectric constant runs from 2.17 to 2.40; for most thicknesses, values within this band are available with tight tolerance, and dissipation factor sits near 0.0009 at 10 GHz.
![]()
| TLY-5Z Typical Values | |||||
| Property | Test Method | Unit | Value | Unit | Value |
| Dk @ 1.9 GHz | IPC-650 2.5.5.5.1 Mod. | 2.20+/- 0.04 | 2.20+/- 0.04 | ||
| Df @ 1.9 GHz | IPC-650 2.5.5.5.1 Mod. | 0.001 | 0.001 | ||
| Df @ 10 GHz | IPC-650 2.5.5.5.1 Mod. | 0.0015 | 0.0015 | ||
| Tc(D)K (-55 ~150°C) | IPC-650 2.5.5.6 Mod. | ppm/°C | -72 | ppm/°C | -72 |
| Dielectric Breakdown Voltage | IPC-650 2.5.6 | kV | 45 | kV | 45 |
| Dielectric Strength | IPC-650 2.5.6.2 | V/mil | 770 | V/mm | 30,315 |
| Moisture Absorption | IPC-650 2.6.2.1 | % | 0.03 | % | 0.03 |
| Peel Strength (1 oz. copper) | IPC-650 2.4.8 | lbs./inch | 7 | N/mm | 1.3 |
| Volume Resistivity | IPC-650 2.5.17.1 | Mohms/cm | 10^9 | Mohms/cm | 10^9 |
| Surface Resistivity | IPC-650 2.5.17.1 | Mohms | 10^8 | Mohms | 10^8 |
| Tensile Strength (MD) | IPC-650 2.4.18.3 | psi | 9137 | N/mm2 | 63 |
| Tensile Strength (CD) | IPC-650 2.4.18.3 | psi | 9572 | N/mm2 | 66 |
| Tensile Modulus (MD) | IPC-650 2.4.18.3 | psi | 182,748 | N/mm2 | 1260 |
| Tensile Modulus (CD) | IPC-650 2.4.18.3 | psi | 165,344 | N/mm2 | 1140 |
| Elongation (MD) | IPC-650 2.4.18.3 | % | 6 | % | 6 |
| Elongation (CD) | IPC-650 2.4.18.3 | % | 6.9 | % | 6.9 |
| Flex Strength (MD) | ASTM D790 | psi | 10,300 | N/mm2 | 71 |
| Flex Strength (CD) | ASTM D790 | psi | 11,600 | N/mm2 | 80 |
| Flex Modulus (MD) | ASTM D790 | psi | 377,100 | N/mm2 | 2600 |
| Flex Modulus (CD) | ASTM D790 | psi | 432,213 | N/mm2 | 2980 |
| Dimensional Stability (MD) | IPC-650 2.4.39 (Bake) | % (10 mil) | -0.05 | % (30 mil) | -0.05 |
| Dimensional Stability (CD) | IPC-650 2.4.39 (Bake) | % (10 mil) | -0.17 | % (30 mil) | -0.11 |
| Dimensional Stability (MD) | IPC-650 2.4.39 (Stress) | % (10 mil) | -0.07 | % (30 mil) | -0.07 |
| Dimensional Stability (CD) | IPC-650 2.4.39 (Stress) | % (10 mil) | -0.22 | % (30 mil) | -0.14 |
| Density (Specific Gravity) | IPC-650 2.3.5 | g/cm3 | 1.92 | g/cm3 | 1.92 |
| Specific Heat | IPC-650 2.4.50 | J/g°C | 0.95 | J/g°C | 0.95 |
| Thermal Conductivity | IPC-650 2.4.50 | W/M*K | 0.2 | W/M*K | 0.2 |
| CTE (x-y) (50 - 150°C) | IPC-650 2.4.41 | ppm/ºC | 30-40 | ppm/ºC | 30-40 |
| CTE (z) (50 - 150°C) | IPC-650 2.4.41 | ppm/ºC | 130 | ppm/ºC | 130 |
| Hardness | ASTM D2240 (Durometer) | - | 68 | - | 68 |
| UL-94 Flammability Rating | UL-94 | V-0 | V-0 | ||
Material Benefits
Applications
|
Typical Thicknesses |
|||
| Inch | mm | Inch | mm |
| 0.0035 | 0.09 | 0.0200 | 0.51 |
| 0.0050 | 0.13 | 0.0300 | 0.76 |
| 0.0075 | 0.19 | 0.0600 | 1.52 |
| 0.0100 | 0.25 | ||
| Available Sheet Sizes | |||
| Inch | mm | Inch | mm |
| 12 x 18 | 305 x 457 | 16 x 36 | 406 x 914 |
| 16 x 18 | 406 x 457 | 24 x 36 | 610 x 914 |
| 18 x 24 | 457 x 610 | 18 x 48 | 457 x 1220 |
This TLY-5Z PCB suits projects that demand low density alongside stable high-frequency signal performance. Fabrication follows IPC-Class-2 standards, and we accept small prototype orders alongside larger ongoing orders for delivery anywhere worldwide. Send over your Gerber files, and our team will put together pricing for you. Feel free to reach out if you would like to check lead times for these high-frequency boards.
![]()
| MOQ: | 1PCS |
| Price: | USD9.99-99.99 |
| Standard Packaging: | Vacuum bags+Cartons |
| Delivery Period: | 8-9 working days |
| Payment Method: | T/T |
| Supply Capacity: | 5000PCS per month |
This two-layer high-frequency rigid circuit board is fabricated on TLY-5Z dielectric and finished with ENIG to maintain stable surface condition and good solderability. White silkscreen marks only the top copper layer, while green solder mask coats both the top and bottom surfaces; the bottom side carries no silkscreen marking at all. This board serves those looking for lightweight radio-frequency circuit substrates built to hold stable plated through-hole performance under variable thermal loads, a critical trait for aerospace projects where every gram counts and consistent electrical behaviour cannot be compromised.
PCB Specifications
| Item | Details |
| Base material | TLY-5Z |
| Layer count | 2-layer |
| Board dimensions | 70 mm × 120 mm per piece, tolerance ±0.15 mm |
| Minimum Trace / Space | 6 / 9 mils |
| Minimum Hole Size | 0.35 mm |
| Blind vias | None |
| Finished board thickness | 0.8 mm |
| Finished copper weight | 1 oz (1.4 mils) outer layers |
| Via plating thickness | 20 μm |
| Surface finish | ENIG |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Green |
| Bottom Solder Mask | Green |
| Pre-shipment check | 100% electrical test |
We take Gerber RS-274-X for file input. Every run adheres to IPC-Class-2, and these circuit boards can ship out to any region globally.
PCB Stack-up
The stack is straightforward: two copper foils wrap a single solid sheet of TLY-5Z dielectric substrate.
| Layer | Material & Thickness |
| Copper_layer_1 | 35 μm |
| TLY-5Z Substrate | 0.762 mm (30 mil) |
| Copper_layer_2 | 35 μm |
PCB Statistics
| Item | Quantity |
| Components | 51 |
| Total Pads | 96 |
| Thru Hole Pads | 56 |
| Top SMT Pads | 40 |
| Bottom SMT Pads | 0 |
| Vias | 21 |
| Nets | 2 |
![]()
About TLY-5Z Laminates
TLY-5Z belongs to a family of advanced composites built from glass-filled PTFE paired with woven fiberglass. Its low-density makeup targets weight-sensitive work such as aerospace hardware, delivering dimensional stability that plain unfilled PTFE cannot match. The material keeps expansion along the Z axis under tight control, and it handles thermal stress far better than many conventional low-Dk PTFE composites, protecting plated through holes during temperature swings.
The closely related TLY-5 grade relies on lightweight woven fiberglass reinforcement. It outperforms chopped-fiber PTFE blends in mechanical stability and supports consistent, high-yield production runs. Its very low dissipation factor works well at millimeter-wave bands. Independent OEM tests at 77 GHz confirm it holds steady insertion loss and dielectric behaviour, while bringing noticeably better yields. Dielectric constant runs from 2.17 to 2.40; for most thicknesses, values within this band are available with tight tolerance, and dissipation factor sits near 0.0009 at 10 GHz.
![]()
| TLY-5Z Typical Values | |||||
| Property | Test Method | Unit | Value | Unit | Value |
| Dk @ 1.9 GHz | IPC-650 2.5.5.5.1 Mod. | 2.20+/- 0.04 | 2.20+/- 0.04 | ||
| Df @ 1.9 GHz | IPC-650 2.5.5.5.1 Mod. | 0.001 | 0.001 | ||
| Df @ 10 GHz | IPC-650 2.5.5.5.1 Mod. | 0.0015 | 0.0015 | ||
| Tc(D)K (-55 ~150°C) | IPC-650 2.5.5.6 Mod. | ppm/°C | -72 | ppm/°C | -72 |
| Dielectric Breakdown Voltage | IPC-650 2.5.6 | kV | 45 | kV | 45 |
| Dielectric Strength | IPC-650 2.5.6.2 | V/mil | 770 | V/mm | 30,315 |
| Moisture Absorption | IPC-650 2.6.2.1 | % | 0.03 | % | 0.03 |
| Peel Strength (1 oz. copper) | IPC-650 2.4.8 | lbs./inch | 7 | N/mm | 1.3 |
| Volume Resistivity | IPC-650 2.5.17.1 | Mohms/cm | 10^9 | Mohms/cm | 10^9 |
| Surface Resistivity | IPC-650 2.5.17.1 | Mohms | 10^8 | Mohms | 10^8 |
| Tensile Strength (MD) | IPC-650 2.4.18.3 | psi | 9137 | N/mm2 | 63 |
| Tensile Strength (CD) | IPC-650 2.4.18.3 | psi | 9572 | N/mm2 | 66 |
| Tensile Modulus (MD) | IPC-650 2.4.18.3 | psi | 182,748 | N/mm2 | 1260 |
| Tensile Modulus (CD) | IPC-650 2.4.18.3 | psi | 165,344 | N/mm2 | 1140 |
| Elongation (MD) | IPC-650 2.4.18.3 | % | 6 | % | 6 |
| Elongation (CD) | IPC-650 2.4.18.3 | % | 6.9 | % | 6.9 |
| Flex Strength (MD) | ASTM D790 | psi | 10,300 | N/mm2 | 71 |
| Flex Strength (CD) | ASTM D790 | psi | 11,600 | N/mm2 | 80 |
| Flex Modulus (MD) | ASTM D790 | psi | 377,100 | N/mm2 | 2600 |
| Flex Modulus (CD) | ASTM D790 | psi | 432,213 | N/mm2 | 2980 |
| Dimensional Stability (MD) | IPC-650 2.4.39 (Bake) | % (10 mil) | -0.05 | % (30 mil) | -0.05 |
| Dimensional Stability (CD) | IPC-650 2.4.39 (Bake) | % (10 mil) | -0.17 | % (30 mil) | -0.11 |
| Dimensional Stability (MD) | IPC-650 2.4.39 (Stress) | % (10 mil) | -0.07 | % (30 mil) | -0.07 |
| Dimensional Stability (CD) | IPC-650 2.4.39 (Stress) | % (10 mil) | -0.22 | % (30 mil) | -0.14 |
| Density (Specific Gravity) | IPC-650 2.3.5 | g/cm3 | 1.92 | g/cm3 | 1.92 |
| Specific Heat | IPC-650 2.4.50 | J/g°C | 0.95 | J/g°C | 0.95 |
| Thermal Conductivity | IPC-650 2.4.50 | W/M*K | 0.2 | W/M*K | 0.2 |
| CTE (x-y) (50 - 150°C) | IPC-650 2.4.41 | ppm/ºC | 30-40 | ppm/ºC | 30-40 |
| CTE (z) (50 - 150°C) | IPC-650 2.4.41 | ppm/ºC | 130 | ppm/ºC | 130 |
| Hardness | ASTM D2240 (Durometer) | - | 68 | - | 68 |
| UL-94 Flammability Rating | UL-94 | V-0 | V-0 | ||
Material Benefits
Applications
|
Typical Thicknesses |
|||
| Inch | mm | Inch | mm |
| 0.0035 | 0.09 | 0.0200 | 0.51 |
| 0.0050 | 0.13 | 0.0300 | 0.76 |
| 0.0075 | 0.19 | 0.0600 | 1.52 |
| 0.0100 | 0.25 | ||
| Available Sheet Sizes | |||
| Inch | mm | Inch | mm |
| 12 x 18 | 305 x 457 | 16 x 36 | 406 x 914 |
| 16 x 18 | 406 x 457 | 24 x 36 | 610 x 914 |
| 18 x 24 | 457 x 610 | 18 x 48 | 457 x 1220 |
This TLY-5Z PCB suits projects that demand low density alongside stable high-frequency signal performance. Fabrication follows IPC-Class-2 standards, and we accept small prototype orders alongside larger ongoing orders for delivery anywhere worldwide. Send over your Gerber files, and our team will put together pricing for you. Feel free to reach out if you would like to check lead times for these high-frequency boards.
![]()