| MOQ: | 1PCS |
| Price: | USD9.99-99.99 |
| Standard Packaging: | Vacuum bags+Cartons |
| Delivery Period: | 8-9 working days |
| Payment Method: | T/T |
| Supply Capacity: | 5000PCS per month |
This two-layer rigid PCB uses Rogers TMM13i, an isotropic thermoset microwave composite, with OSP as its surface finish. Only the top side carries green solder mask and white silkscreen; the reverse side has neither solder mask nor marking. It works well for high-reliability stripline and microstrip circuits, including passive microwave parts and satellite communication hardware. Every board goes through full electrical test before shipment.
PCB Specifications
| Section | Details |
| Board dimensions | 47.1 mm × 88.9 mm, 1 piece |
| Minimum Trace / Space | 4 / 6 mils |
| Minimum Hole Size | 0.25 mm |
| Blind vias | None |
| Finished board thickness | 2 mm |
| Outer finished copper | 1 oz (1.4 mils) |
| Via plating thickness | 20 μm |
| Surface finish | OSP |
| Top silkscreen | White |
| Bottom silkscreen | None |
| Top solder mask | Green |
| Bottom solder mask | None |
| Preshipment test | 100% electrical test |
The artwork is supplied in Gerber RS-274-X format; the boards follow IPC-Class-2 accepted standard and can be shipped worldwide.
Stack-up
This two-layer rigid construction uses a single TMM13i substrate sandwiched between two copper foils. The structure keeps consistent electrical performance and supports plated through-hole processing for stripline and microstrip circuits.
| Layer | Specification |
| Copper_layer_1 | 35 μm |
| Substrate | TMM13i, 75 mil (1.905 mm) |
| Copper_layer_2 | 35 μm |
PCB Statistics
These figures come directly from the submitted Gerber files and offer a quick overview of the board’s pad, via and net count for production review.
| Item | Quantity |
| Components | 43 |
| Total Pads | 71 |
| Thru Hole Pads | 45 |
| Top SMT Pads | 26 |
| Bottom SMT Pads | 0 |
| Vias | 39 |
| Nets | 4 |
![]()
Introduction of TMM13i Substrate
Rogers TMM13i belongs to the TMM family of thermoset laminates. It is a ceramic-filled polymer composite built for microwave circuits that need steady and predictable electrical behaviour. The “i” stands for isotropic, meaning its dielectric constant stays consistent in every direction. This cuts down uncertainty when building stripline and microstrip circuits. Its higher dielectric constant also helps shrink circuit features, which is helpful when people need to fit more RF function into a limited space.
It brings together useful traits found in ceramic and PTFE substrates, without many of the usual processing headaches. Unlike most PTFE high-frequency materials, it fits into regular PCB workflows and handles lead-free thermal cycles without special preparation. Since it uses thermoset resin, it will not soften or flow easily under heat. Its thermal expansion is close to copper, so plated through holes stay intact even after repeated temperature changes. All these points make it a solid pick for circuits that must hold stable RF performance over time.
![]()
Benefits
Applications
| TMM13i Typical Value | ||||||
| Property | TMM13i | Direction | Units | Condition | Test Method | |
| Dielectric Constant,εProcess | 12.85±0.35 | Z | 10 GHz | IPC-TM-650 2.5.5.5 | ||
| Dielectric Constant,εDesign | 12.2 | - | - | 8GHz to 40 GHz | Differential Phase Length Method | |
| Dissipation Factor (process) | 0.0019 | Z | - | 10 GHz | IPC-TM-650 2.5.5.5 | |
| Thermal Coefficient of dielectric constant | -70 | - | ppm/°K | -55℃-125℃ | IPC-TM-650 2.5.5.5 | |
| Insulation Resistance | >2000 | - | Gohm | C/96/60/95 | ASTM D257 | |
| Volume Resistivity | - | - | Mohm.cm | - | ASTM D257 | |
| Surface Resistivity | - | - | Mohm | - | ASTM D257 | |
| Electrical Strength(dielectric strength) | 213 | Z | V/mil | - | IPC-TM-650 method 2.5.6.2 | |
| Thermal Properties | ||||||
| Decompositioin Temperature(Td) | 425 | 425 | ℃TGA | - | ASTM D3850 | |
| Coefficient of Thermal Expansion - x | 19 | X | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
| Coefficient of Thermal Expansion - Y | 19 | Y | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
| Coefficient of Thermal Expansion - Z | 20 | Z | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
| Thermal Conductivity | - | Z | W/m/K | 80 ℃ | ASTM C518 | |
| Mechanical Properties | ||||||
| Copper Peel Strength after Thermal Stress | 4.0 (0.7) | X,Y | lb/inch (N/mm) | after solder float 1 oz. EDC | IPC-TM-650 Method 2.4.8 | |
| Flexural Strength (MD/CMD) | - | X,Y | kpsi | A | ASTM D790 | |
| Flexural Modulus (MD/CMD) | - | X,Y | Mpsi | A | ASTM D790 | |
| Physical Properties | ||||||
| Moisture Absorption (2X2) | 1.27mm (0.050") | 0.16 | - | % | D/24/23 | ASTM D570 |
| 3.18mm (0.125") | 0.13 | |||||
| Specific Gravity | 3 | - | - | A | ASTM D792 | |
| Specific Heat Capacity | - | - | J/g/K | A | Calculated | |
| Lead-Free Process Compatible | YES | - | - | - | - | |
With its steady high dielectric value, low loss and copper-matched thermal expansion, this TMM13i PCB serves as a practical solution for demanding microwave work. It skips the extra plating preparation required by many other high frequency substrates and keeps reliable performance through lead-free processing, making it suitable for compact filters, couplers, test fixtures and satellite radio circuits. Send over your Gerber files, and we will prepare a quote based on your requirements.
![]()
| MOQ: | 1PCS |
| Price: | USD9.99-99.99 |
| Standard Packaging: | Vacuum bags+Cartons |
| Delivery Period: | 8-9 working days |
| Payment Method: | T/T |
| Supply Capacity: | 5000PCS per month |
This two-layer rigid PCB uses Rogers TMM13i, an isotropic thermoset microwave composite, with OSP as its surface finish. Only the top side carries green solder mask and white silkscreen; the reverse side has neither solder mask nor marking. It works well for high-reliability stripline and microstrip circuits, including passive microwave parts and satellite communication hardware. Every board goes through full electrical test before shipment.
PCB Specifications
| Section | Details |
| Board dimensions | 47.1 mm × 88.9 mm, 1 piece |
| Minimum Trace / Space | 4 / 6 mils |
| Minimum Hole Size | 0.25 mm |
| Blind vias | None |
| Finished board thickness | 2 mm |
| Outer finished copper | 1 oz (1.4 mils) |
| Via plating thickness | 20 μm |
| Surface finish | OSP |
| Top silkscreen | White |
| Bottom silkscreen | None |
| Top solder mask | Green |
| Bottom solder mask | None |
| Preshipment test | 100% electrical test |
The artwork is supplied in Gerber RS-274-X format; the boards follow IPC-Class-2 accepted standard and can be shipped worldwide.
Stack-up
This two-layer rigid construction uses a single TMM13i substrate sandwiched between two copper foils. The structure keeps consistent electrical performance and supports plated through-hole processing for stripline and microstrip circuits.
| Layer | Specification |
| Copper_layer_1 | 35 μm |
| Substrate | TMM13i, 75 mil (1.905 mm) |
| Copper_layer_2 | 35 μm |
PCB Statistics
These figures come directly from the submitted Gerber files and offer a quick overview of the board’s pad, via and net count for production review.
| Item | Quantity |
| Components | 43 |
| Total Pads | 71 |
| Thru Hole Pads | 45 |
| Top SMT Pads | 26 |
| Bottom SMT Pads | 0 |
| Vias | 39 |
| Nets | 4 |
![]()
Introduction of TMM13i Substrate
Rogers TMM13i belongs to the TMM family of thermoset laminates. It is a ceramic-filled polymer composite built for microwave circuits that need steady and predictable electrical behaviour. The “i” stands for isotropic, meaning its dielectric constant stays consistent in every direction. This cuts down uncertainty when building stripline and microstrip circuits. Its higher dielectric constant also helps shrink circuit features, which is helpful when people need to fit more RF function into a limited space.
It brings together useful traits found in ceramic and PTFE substrates, without many of the usual processing headaches. Unlike most PTFE high-frequency materials, it fits into regular PCB workflows and handles lead-free thermal cycles without special preparation. Since it uses thermoset resin, it will not soften or flow easily under heat. Its thermal expansion is close to copper, so plated through holes stay intact even after repeated temperature changes. All these points make it a solid pick for circuits that must hold stable RF performance over time.
![]()
Benefits
Applications
| TMM13i Typical Value | ||||||
| Property | TMM13i | Direction | Units | Condition | Test Method | |
| Dielectric Constant,εProcess | 12.85±0.35 | Z | 10 GHz | IPC-TM-650 2.5.5.5 | ||
| Dielectric Constant,εDesign | 12.2 | - | - | 8GHz to 40 GHz | Differential Phase Length Method | |
| Dissipation Factor (process) | 0.0019 | Z | - | 10 GHz | IPC-TM-650 2.5.5.5 | |
| Thermal Coefficient of dielectric constant | -70 | - | ppm/°K | -55℃-125℃ | IPC-TM-650 2.5.5.5 | |
| Insulation Resistance | >2000 | - | Gohm | C/96/60/95 | ASTM D257 | |
| Volume Resistivity | - | - | Mohm.cm | - | ASTM D257 | |
| Surface Resistivity | - | - | Mohm | - | ASTM D257 | |
| Electrical Strength(dielectric strength) | 213 | Z | V/mil | - | IPC-TM-650 method 2.5.6.2 | |
| Thermal Properties | ||||||
| Decompositioin Temperature(Td) | 425 | 425 | ℃TGA | - | ASTM D3850 | |
| Coefficient of Thermal Expansion - x | 19 | X | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
| Coefficient of Thermal Expansion - Y | 19 | Y | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
| Coefficient of Thermal Expansion - Z | 20 | Z | ppm/K | 0 to 140 ℃ | ASTM E 831 IPC-TM-650, 2.4.41 | |
| Thermal Conductivity | - | Z | W/m/K | 80 ℃ | ASTM C518 | |
| Mechanical Properties | ||||||
| Copper Peel Strength after Thermal Stress | 4.0 (0.7) | X,Y | lb/inch (N/mm) | after solder float 1 oz. EDC | IPC-TM-650 Method 2.4.8 | |
| Flexural Strength (MD/CMD) | - | X,Y | kpsi | A | ASTM D790 | |
| Flexural Modulus (MD/CMD) | - | X,Y | Mpsi | A | ASTM D790 | |
| Physical Properties | ||||||
| Moisture Absorption (2X2) | 1.27mm (0.050") | 0.16 | - | % | D/24/23 | ASTM D570 |
| 3.18mm (0.125") | 0.13 | |||||
| Specific Gravity | 3 | - | - | A | ASTM D792 | |
| Specific Heat Capacity | - | - | J/g/K | A | Calculated | |
| Lead-Free Process Compatible | YES | - | - | - | - | |
With its steady high dielectric value, low loss and copper-matched thermal expansion, this TMM13i PCB serves as a practical solution for demanding microwave work. It skips the extra plating preparation required by many other high frequency substrates and keeps reliable performance through lead-free processing, making it suitable for compact filters, couplers, test fixtures and satellite radio circuits. Send over your Gerber files, and we will prepare a quote based on your requirements.
![]()