|
Product Details:
Payment & Shipping Terms:
|
| Based Material: | PTFE Woven Glass | PCB Thickness: | 1.6mm |
|---|---|---|---|
| DK: | 2.65 | Solder Mask: | Black |
| High Light: | PTFE Based PCB Circuit Board,Solder Mask PCB Circuit Board,1.6mm PTFE PCB Board |
||
DK2.65 F4B PTFE Based 1.6mm High Frequency PCB Black Solder Mask Circuit
Polytetrafluoroethylene (PTFE), also referred to as "plastic king," is a polymer compound created by polymerizing tetrafluoroethylene. Excellent chemical stability, corrosion resistance, sealing, high lubrication, low viscosity, electrical insulation, and strong aging resistance are only a few of its many strengths. It can be produced into PTFE tube, rod, belt, plate, film, and other engineering plastic products. It is typically utilized in high performance requirements for corrosion-resistant pipelines, containers, pumps, valves, radar, high-frequency communication equipment, and radio equipment.
By laminating varnished glass cloth with Teflon resin, F4BM-1/2 is laminated in accordance with a precise technological procedure and scientific formulation. Compared to the F4B series, this product has some advantages in terms of electrical performance (wider range of dielectric constant,lower dielectric loss angle tangent,increased resistance,and more stability of performance).
The dielectric constant of PTFE materials is as low as 3.5 or lower at RF and microwave frequencies, which maintains a strong signal while transmission across PCB and makes them the perfect solution for getting around FR-4's high speed restriction.
PCB Capability (PTFE)
| PCB Material: | Fibre glass coated PTFE |
| Code: | F4BM-1/2 (family series) |
| Dielectric constant: | 2.2, 2.55, 2.65, |
| 3.0 and 3.5 | |
| Layer count: | 1 Layer, 2 Layers and multi-layer |
| Copper weight: | 0.5oz (17 µm), 1oz (35µm), 2oz (70µm), 3oz (105µm) |
| PCB thickness: | 0.25mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm,3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Silver, OSP,etc. |
Contact Person: Ms. Ivy Deng
Tel: 86-755-27374946
Fax: 86-755-27374848
