|
Product Details:
Payment & Shipping Terms:
|
| Base Material: | PTFE F4B Series | Layer Count: | 1 Layer, 2 Layer, Multilayer, Hybrid Type |
|---|---|---|---|
| PCB Thickness: | 0.17mm, 0.25mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm And 5.0mm, Etc. | PCB Size: | ≤400mm X 500mm |
| Copper Weight: | 0.5oz, 1oz, 2oz, 3oz | Surface Finish: | Bare Copper, HASL, ENIG, Immersion Tin Etc. |
| High Light: | 3oz Copper F4B PCB,PTFE F4B PCB,3oz Copper PTFE PCB |
||
Dual Layer High Frequency PCB Built On 1.5mm PTFE (Teflon) with 3oz Copper and Immersion Gold
(PCB's are custom-made products, the picture and parameters shown are just for reference)
Hello everybody,
Today we talk about a type of F4B high frequency circuit board.
F4B series high frequency material is mainly PTFE glass fiber cloth and ceramic-filled PTFE glass fiber cloth etc. It is a series of high frequency materials of Chinese brand, which is cheap in price and stable in quality. It's widely applied to radar, navigation, satellite communication, 4G communications, 5G communications and the like.
| PCB Specifications | |
| Layer count: | Double sided |
| Base material: | F4B DK 2.65 |
| Dimension: | 210 x 115mm |
| Finished thickness | 1.6mm ±10% |
| Finished Copper weight: | 3oz |
| SMOBC: | No |
| Surface finish: | Immersion gold |
The main specifications of this board is double sided board, substrate is F4B, DK at 2.65, 210mm long by 115mm wide, 1.6mm finished thick, finished copper 3oz, no solder mask no silkscreen, and surface finish is immersion gold.
Let’s see the stack up.
Top layer and bottom layer are 3oz copper finished. F4b dielectric material is in the middle of 2 layers copper, showing dielectric constant at 2.65.
From the photo of this board, the track is thicker than normal boards; surface finish is immersion gold and no solder mask and silkscreen.
| PCB Capability | |
| PCB Material: | PTFE |
| Code: | F4B series |
| Dielectric constant: | 2.2, 2.55 and 2.65 |
| 2.17, 2.45, 2.75 and 3.0 | |
| Layer count: | 1 Layer, 2 Layer, Multilayer, Hybrid type |
| Copper weight: | 0.5oz, 1oz, 2oz, 3oz |
| PCB thickness: | 0.17mm, 0.25mm, 0.5mm, 0.8mm, 1.0mm, |
| 1.5mm, 2.0mm, 3.0mm, 4.0mm and 5.0mm, etc. | |
| PCB Size: | ≤400mm X 500mm |
| Surface finish: | Bare copper, HASL, ENIG, Immersion tin etc. |
The dielectric constant of F4B material is wide, ranging 2.2 to 3.0 etc. Board thickness ranges 0.17mm to 5.0mm. We can provide you with prototype service, small batches and mass production service.
Should you have any questions, please feel free to contact us.
Thank you for your reading.
Appendix: Data Sheet of PTFE(F4B)
| Name | Test condition | Unit | Value | |||
| Density | Normal state | g/ cm3 | 2.1～2.35 | |||
| Moisture Absorption | Dip in the distilled water of 20±2℃ for 24 hours | % | ≤0.02 | |||
| Operating Temperature | High-low temperature chamber | ℃ | -50℃～+260℃ | |||
| Thermal Conductivity | W/m/k | 0.8 | ||||
| CTE (typical) | 0～100℃ (εr :2.1~2.3) | ppm/℃ | 25(x) | |||
| 34(y) | ||||||
| 252(z) | ||||||
| CTE (typical) | 0～100℃ (εr :2.3~2.9) | ppm/℃ | 14(x) | |||
| 21(y) | ||||||
| 173(z) | ||||||
| CTE (typical) | 0～100℃ (εr :2.9~3.5) | ppm/℃ | 12(x) | |||
| 15(y) | ||||||
| 95(z) | ||||||
| Shrinkage Factor | 2 hours in boiling water | % | 0.0002 | |||
| Surface Resistivity | 500V DC | Normal state | M·Ω | ≥1×104 | ||
| Constant humidity and temperature | ≥1×103 | |||||
| Volume Resistivity | Normal state | MΩ.cm | ≥1×106 | |||
| Constant humidity and temperature | ≥1×105 | |||||
| Pin Resistance | 500V DC | Normal state | MΩ | ≥1×105 | ||
| Constant humidity and temperature | ≥1×103 | |||||
| Surface dielectric strength | Normal state | d=1mm(Kv/mm) | ≥1.2 | |||
| Constant humidity and temperature | ≥1.1 | |||||
| Dielectric Constant | 10GHZ | εr | 2.20,2.55,2.65,3.0,3.5 (±2%) | |||
| Dissipation Factor | 10GHZ | tgδ | 2.2 | ≤7×10-4 | ||
| 2.55~2.65 | ≤1×10-3 | |||||
| 3.0~3.5 | ≤1.5×10-3 | |||||
Contact Person: Ms. Ivy Deng
Tel: 86-755-27374946
Fax: 86-755-27374848
