Product Details:
Payment & Shipping Terms:
|
Base Material: | RT/Duroid 6002 | Layer Count: | 2 Layers |
---|---|---|---|
PCB Thickness: | 0.8mm | PCB Size: | 60 X 35 Mm=1PCS |
Solder Mask: | Green | Silkscreen: | White |
Copper Weight: | 0.5oz | Surface Finish: | Immersion Gold |
High Light: | 30mil Immersion Gold Pcb,Rogers Immersion Gold Pcb,2 Layers Rogers PCB Board |
Rogers HF PCB Built on RT/Duroid 6002 30mil 0.762mm DK2.94 With Immersion Gold for Global Positioning System Antennas
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers RT/duroid 6002 microwave material was the first low loss and low dielectric constant laminate to offer superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.
The thermal coefficient of dielectric constant is extremely low from -55℃ to +150℃ which provides the designers of filters, oscillators and delay lines the electrical stability needed in today's demanding applications.
A low Z axis coefficient of thermal expansion(CTE) ensures excellent reliability of plated through holes. RT/duroid 6002 materials have been successfully temperature cycled (-55℃ TO 125℃) for over 5000 cycles without a single via failure.
Excellent dimensional stability (0.2 to 0.5 mils/inch) is achieved by matching the X and Y coefficient of expansion to copper. This often eliminates double etching to achieve tight positional tolerances.
The low tensile modulus (X,Y) greatly reduces the stress applied to solder joints and allows the expansion of the laminate to be constrained by a minimum amount of low CTE metal (6 ppm/℃) further increasing surface mount reliability.
Applications particularly suited to the unique properties of RT/duroid 6002 material include flat and non-planar structures such antennas, complex mutli-layer circuits with inter-layer connections, and microwave circuits for aerospace designs in hostile environments.
Typical applications:
1. Airborne radar systems
2. Commercial airline collision avoidance
3. Ground base systems
4. Phased array antennas
PCB Specifications
PCB SIZE | 60 x 35 mm=1PCS |
BOARD TYPE | Double sided PCB |
Number of Layers | 2 layers |
Surface Mount Components | YES |
Through Hole Components | NO |
LAYER STACKUP | copper ------- 18um(0.5 oz)+plate TOP layer |
RT/duroid 6002 0.762mm | |
copper ------- 18um(0.5 oz)+plate BOT layer | |
TECHNOLOGY | |
Minimum Trace and Space: | 5 mil / 5 mil |
Minimum / Maximum Holes: | 0.3mm / 1.0mm |
Number of Different Holes: | no |
Number of Drill Holes: | no |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | 0 |
Impedance Control: | no |
Number of Gold finger: | 0 |
BOARD MATERIAL | |
Glass Epoxy: | RT/duroid 6002 0.762mm |
Final foil external: | 1 oz |
Final foil internal: | 1 oz |
Final height of PCB: | 0.8 mm ±0.1 |
PLATING AND COATING | |
Surface Finish | Immersion gold (61.4% ) 0.05µm over 3µm nickel |
Solder Mask Apply To: | Top and Bottom, 12micron Minimum |
Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
Solder Mask Type: | LPSM |
CONTOUR/CUTTING | Routing |
MARKING | |
Side of Component Legend | Top |
Colour of Component Legend | White, IJR-4000 MW300, Taiyo brand |
Manufacturer Name or Logo: | Marked on the board in a conductor and leged FREE AREA |
VIA | N/A |
FLAMIBILITY RATING | UL 94-V0 Approval MIN. |
DIMENSION TOLERANCE | |
Outline dimension: | 0.0059" |
Board plating: | 0.0029" |
Drill tolerance: | 0.002" |
TEST | 100% Electrical Test prior shipment |
TYPE OF ARTWORK TO BE SUPPLIED | email file, Gerber RS-274-X, PCBDOC etc |
SERVICE AREA | Worldwide, Globally. |
Data Sheet of Rogers 6002 (RT/duroid 6002)
RT/duroid 6002 Typical Value | |||||
Property | RT/duroid 6002 | Direction | Units | Condition | Test Method |
Dielectric Constant,εProcess | 2.94±0.04 | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 | |
Dielectric Constant,εDesign | 2.94 | 8GHz to 40 GHz | Differential Phase Length Method | ||
Dissipation Factor,tanδ | 0.0012 | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 | |
Thermal Coefficient of ε | +12 | Z | ppm/℃ | 10 GHz 0℃-100℃ | IPC-TM-650 2.5.5.5 |
Volume Resistivity | 106 | Z | Mohm.cm | A | ASTM D 257 |
Surface Resistivity | 107 | Z | Mohm | A | ASTM D 257 |
Tensile Modulus | 828(120) | X,Y | MPa(kpsi) | 23℃ | ASTM D 638 |
Ultimate Stress | 6.9(1.0) | X,Y | MPa(kpsi) | ||
Ultimate Strain | 7.3 | X,Y | % | ||
Compressive Modulus | 2482(360) | Z | MPa(kpsi) | ASTM D 638 | |
Moisture Absorption | 0.02 | % | D48/50 | IPC-TM-650 2.6.2.1 ASTM D 570 |
|
Thermal Conductivity | 0.6 | W/m/k | 80℃ | ASTM C518 | |
Coefficient of Thermal Expansion (-55 to 288℃) |
16 16 24 |
X Y Z |
ppm/℃ | 23℃/50% RH | IPC-TM-650 2.4.41 |
Td | 500 | ℃ TGA | ASTM D 3850 | ||
Density | 2.1 | gm/cm3 | ASTM D 792 | ||
Specific Heat | 0.93(0.22) | j/g/k (BTU/ib/OF) |
Calculated | ||
Copper Peel | 8.9(1.6) | Ibs/in.(N/mm) | IPC-TM-650 2.4.8 | ||
Flammability | V-0 | UL 94 |
Contact Person: Ms. Ivy Deng
Tel: 86-755-27374946
Fax: 86-755-27374848